From the Manufacturer
14-Inch Tote more-open carry all with drawer, great to carry hardware, garden or craft items, measures 15-Inch by 9. 25-Inch by 7-Inch
High-Impact Plastic Tote Tray 14-3/4″x9-1/8″x6-7/8″ Pull Out 9 Compartment Drawer
Posts Tagged ‘1/4Inch’
Plano Molding 311 14-Inch Tote, Graphite Gray and Iron Yellow
April 5th, 2010SK 1709 Professional 9 Piece 6 Point and 12 Point 1/4-Inch to 3/4-Inch Fractional Combination Wrench Set
February 23rd, 2010
From the Manufacturer
9 piece set is made in the U. S. A. , featuring SK’s SureGrip® wrenching design on wrench box ends, which drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Open end is angled 15 degrees for greater access. The box end design features a 15 degrees offset head, which provides usefull clearance.
Sets - Wrenches Tool Type: Combination Measurement Type: Inch Fractional Size: 6 Point: 1/4, 5/16, 3/8, 7/16 12 Point: 1/2, 9/16, 5/8, 11/16, 3/4 Number of Pieces: 9
Hitachi 725015 SDS4 Plus 3/16-Inch x 12-Inch x 14-Inch 2-Cutter Drill Bit
February 21st, 2010
From the Manufacturer
Hitachi 725015 SDS4 Plus 3/16″ x 12″ x 14″ Drill Bit 2-Cutter
SDS4+ 3/16″x12″x14″ DRILLBIT
More Hitachi 725015 SDS4 Plus 3/16-Inch x 12-Inch x 14-Inch 2-Cutter Drill Bit from Amazon.com »
Neuton 14-Inch Aero Lawn Mower Replacement Blade For CE 5 Mowers
February 21st, 2010
From the Manufacturer
14-inch Spare Aero Blade for Neuton CE 5 Mowers. For the finest looking lawn, you need to have a sharp lawn mower blade. The 14-inch Neuton CE 5 Mower Aero Blade is factory sharpened for superior cutting and long-lasting performance. This steel blade has been engineered to work in all three modes of grass discharge: side discharge, rear bagging, and mulching. The aerodynamic blade design gives your Neuton Mower a longer run time and your lawn a cleaner cut. Fits all Neuton CE 5 Battery-Powered Mowers.
14″ Spare Aero Blade for Neuton CE 5 Mowers. For the finest looking lawn, you need to have a sharp lawn mower blade. The 14″ Neuton CE 5 Mower Aero Blade is factory sharpened for superior cutting and long-lasting performance. This steel blade has been engineered to work in all three modes of grass discharge: side discharge, rear bagging and mulching. The aerodynamic blade design gives your Neuton Mower a longer run time and your
More Neuton 14-Inch Aero Lawn Mower Replacement Blade For CE 5 Mowers from Amazon.com »
Stanley PTT44 20-Pack 1/8-Inch x 1/4-Inch Stainless Steel Rivets
February 21st, 2010
From the Manufacturer
Stainless steel rivets are excellent for marine applications. Reusable, full-visibility packaging simplifies product selection and storage. High-strength, stainless steel resists corrosion.
20 Pack, 1/8″ x 1/4″, Stainless Steel Rivet.
More Stanley PTT44 20-Pack 1/8-Inch x 1/4-Inch Stainless Steel Rivets from Amazon.com »
Makita DPC7311 Factory Reconditioned 14-inch Power Cutter
February 20th, 2010
The Makita DPC7311R Factory Reconditioned DPC7311 14-inch power cutter smoothly powers through metal, concrete, cinder blocks, bricks, et al. Boasting a 5-stage, foam-paper-nylon system, with Advanced Directional Air Flow, this Makita power saw gets the cleanest possible air for better performance. The reinforced aluminum blade guard covers the blade up to 70 degrees to allow limitless positioning of this saw. The 73cc motor is supported by a microchip controlled carburetor that prevents the engine from taking maximum load when it is not required, thus enhancing the longevity of this power cutter. The advanced ignition system enjoys a larger flywheel and rare earth magnet, to deliver more power. Effectively you use less effort to get your work done. Moreover, the cutting arm position easily switches from center to flush cutting position to provide more hand space while cutting adjacent curb edges and walls. The cushioned operator grips with 4 vibration-absorption rubber
More Makita DPC7311 Factory Reconditioned 14-inch Power Cutter from Amazon.com »
BOSCH 85220M V-Groove 1-1/4-Inch Diameter 7/8-Inch Cut 1/4-Inch Shank Router Bit
February 19th, 2010
From the Manufacturer
Carbide tipped v-groove bits and scoring bits are micrograin bits ideal for door-front grooving, lettering and sign work. Feature shear angle cutter geometry for smooth, efficient cutting
A. Overall Diameter: 1-1/4″ B. Cutting Edge Length : 7/8″ Bevel Cut Depth : 7/8″ (45##deg##) C. Shank Diameter : 1/4″ D. Shank Length : 1-7/32″ E. Overall Length : 2-7/64″ F. Bevel Cut : 7/8″ (45##deg##) Flute Length : 13/16″ Item Description : V-Grove Bit Two Flutes, High-Speed Steel Overall Diameter : 1-1/4″ Overall Length : 1-13/16″ Part Number : 85220M Shank Diameter : 1/4″
Factory-Reconditioned Milwaukee 0881-82 18-Volt Cordless V18 1/4-Inch Hex Impact Driver
February 19th, 2010
From the Manufacturer
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Milwaukee 0881-82 Recon 18V Cordless V18 1/4-Inch Hex Impact Driver provides a category leading 1,400 inch-to-pounds of torque. This impact driver is a versatile tool for a wide range of driving and fastening applications, with an all-metal gear and impact mechanism that is designed for heavy-duty durability. The 0881-82 features a variable speed trigger for output power control, a convenient on-board bit storage frequent bit changes, and a soft grip over mold handle that improves user comfort. This hex impact driver has a built-in L. E. D. light to illuminate dark work spots, and an exclusive reversible battery that ensures better balance and also allows you to get into tight spots, making it ideal for automotive and professional applications.
More Factory-Reconditioned Milwaukee 0881-82 18-Volt Cordless V18 1/4-Inch Hex Impact Driver from Amazon.com »
Hitachi 728887 SDS Plus 1/4-Inch x 4-Inch x 6-Inch 3-Cutter Drill Bit
February 16th, 2010
From the Manufacturer
Hitachi 728887 SDS Plus 1/4″ x 4″ x 6″ Drill Bit 3-Cutter
SDS+ 1/4″x4″x6″ BIT 3CUTTER
More Hitachi 728887 SDS Plus 1/4-Inch x 4-Inch x 6-Inch 3-Cutter Drill Bit from Amazon.com »
Eazypower 73630 Flex-A-Bit Plus 36-Inch Industrial 1/4-Inch Hex Bit Kit
February 16th, 2010
From the Manufacturer
Heavy duty flex-a-bit flexible extension, measure 36-Inch and flexes to 90-Degree, for use in high speed tools, cordless or hand screwdrivers and drills. This is the only flexible shaft where the entire outer sleeve does not rotate. (Rated 13-Feet/Pound torque) Use in hard to reach places, in cars, kitchen cabinets, appliances etc. Industrial 1/4-Inch hex male by 1/4-Inch female square drive patented.
More Eazypower 73630 Flex-A-Bit Plus 36-Inch Industrial 1/4-Inch Hex Bit Kit from Amazon.com »