Powered | Power Tool Reviews

No Crank RS12581 Crate 125-Foot Water Powered Retractable Garden Hose Reel

February 18th, 2010

The ReelSmart crate 125 auto-rewind 125-foot hose reel comes complete with ample capacity for 125 feet of 5/8-inch hose. Intended as a floor-mounted device, the unit also features corrosion-resistant plastic, and a water-powered automatic-rewind feature is thrown into the mix for added convenience. Other features include an auto-sort guide to keep the hose from binding, and a compact design.

Reelsmart, Crate Hose Reel, 5/8″ Hose Capacity, Up To 125′, Water Powered Automatic Hose Rewind, Durable Plastic Casing With Wood Like Texture, Floor Mountable.

See all

More No Crank RS12581 Crate 125-Foot Water Powered Retractable Garden Hose Reel from Amazon.com »

2 comments »

Posted in Watering Equipment

Tags: 125Foot Crank Crate Garden Hose Powered Reel Retractable RS12581 Water

Electronic Specialties Self Powered Cordless Timing Light

February 9th, 2010

Features and Benefits Accurate up to 14,000 RPM Used for 2 or 4 cycle engines, all ignition systems Protective sleeve withstands high temps (1200 degrees F) Available with 10, 20, 30, 40, or 50 feet (Standard lead length is 4 feet) Bright flash at all speedsThe original battery powered timing light, built with quality to last. There is no need to connect to a 12 volt battery for power. This unit is powered by two “D” cell flashlight batteries. Great tool for marine, snowmobile, industrial, racing engines and other small engine timing. Also the batteries are included. Don’t accept a copy.

More Electronic Specialties Self Powered Cordless Timing Light from Amazon.com »

No comments »

Posted in Power Drills

Tags: Cordless Electronic Light Powered Self Specialties TIMING

Makita DPC7321 14″ Gas Powered cut Off Saw

February 3rd, 2010

# Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance# Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle# Improved ignition system with larger flywheel and rare earth magnets for more power# Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground# Starter grip and decompression valve located on the same side for faster starting# On-Off-Choke operating switch on a single lever for operator convenience# Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort# Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank# Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance

More Makita DPC7321 14″ Gas Powered cut Off Saw from Amazon.com »

No comments »

Posted in Power Drills

Tags: DPC7321 Makita Powered

Black & Decker ACC100 AutoClamp - Battery Powered Clamp

February 3rd, 2010

Providing an impressive 350 pounds of clamping force, this battery-powered tool from Black & Decker has a slip-resistant design and offers a release lever for fast, effortless screw adjustment. Able to be used as either an auto or manual clamp, the ACC100 is a snap to operate with just one hand, and features feet that won’t scratch your work surface, as well as a six-inch opening to accommodate a range of different jobs. Most importantly, it supplies approximately 60 clamps on a single set of batteries, and is ideal for gluing applications and securing wood for cutting, sanding, or painting.

Clamping power with 1-handed operation from start to finish. 350 lb. of clamping force for no more slipping and quick release lever for quick and easy screw adjustment. Can also be used as a manual clamp. Features soft pads to protect your work surface and 6″ opening for a variety of projects. 60 clamps on 1 set of batteries.

See all

More Black & Decker ACC100 AutoClamp - Battery Powered Clamp from Amazon.com »

2 comments »

Posted in Power Drills

Tags: ACC100 AutoClamp Battery Black Clamp Decker Powered

Makita DPC7310 73cc 12-Inch Gas Powered Power Cutter

January 31st, 2010

From the Manufacturer

The Makita DPC7310 12″ power cutter offers a fresh new design that enhances performance and provides greater operator comfort. This 73cc power pack is loaded with new technological innovations such as the micro-chip controlled carburetor that compensates engine timing to work load. The new and improved 5-stage air filtration system has been enlarged by 80% to ensure cleaner air for better performance, even in the dustiest conditions. Better filtration means less down time for maintenance and more production time. Makita also beefed up the aluminum blade guard with pressure plates for reduced vibration and wear. The DPC7310 is equipped with a spring tensioned belt adjustment w/gauge to always ensure proper belt tensioning. Compression release, single knob access to primary air filter and spark plug and a 2-mass dampening system for reduced vibrations makes this the industry leader when it comes to Power Cut saws. You expect the best from Makita -
More Makita DPC7310 73cc 12-Inch Gas Powered Power Cutter from Amazon.com »

No comments »

Posted in Power Drills

Tags: 12Inch 73cc Cutter DPC7310 Makita Power Powered

Black & Decker ACC100 AutoClamp - Battery Powered Clamp

January 24th, 2010

Providing an impressive 350 pounds of clamping force, this battery-powered tool from Black & Decker has a slip-resistant design and offers a release lever for fast, effortless screw adjustment. Able to be used as either an auto or manual clamp, the ACC100 is a snap to operate with just one hand, and features feet that won’t scratch your work surface, as well as a six-inch opening to accommodate a range of different jobs. Most importantly, it supplies approximately 60 clamps on a single set of batteries, and is ideal for gluing applications and securing wood for cutting, sanding, or painting.

Clamping power with 1-handed operation from start to finish. 350 lb. of clamping force for no more slipping and quick release lever for quick and easy screw adjustment. Can also be used as a manual clamp. Features soft pads to protect your work surface and 6″ opening for a variety of projects. 60 clamps on 1 set of batteries.

See all

More Black & Decker ACC100 AutoClamp - Battery Powered Clamp from Amazon.com »

2 comments »

Posted in Power Drills

Tags: ACC100 AutoClamp Battery Black Clamp Decker Powered

Black & Decker ACC100 AutoClamp - Battery Powered Clamp

January 22nd, 2010

Providing an impressive 350 pounds of clamping force, this battery-powered tool from Black & Decker has a slip-resistant design and offers a release lever for fast, effortless screw adjustment. Able to be used as either an auto or manual clamp, the ACC100 is a snap to operate with just one hand, and features feet that won’t scratch your work surface, as well as a six-inch opening to accommodate a range of different jobs. Most importantly, it supplies approximately 60 clamps on a single set of batteries, and is ideal for gluing applications and securing wood for cutting, sanding, or painting.

Clamping power with 1-handed operation from start to finish. 350 lb. of clamping force for no more slipping and quick release lever for quick and easy screw adjustment. Can also be used as a manual clamp. Features soft pads to protect your work surface and 6″ opening for a variety of projects. 60 clamps on 1 set of batteries.

See all

More Black & Decker ACC100 AutoClamp - Battery Powered Clamp from Amazon.com »

2 comments »

Posted in Power Drills

Tags: ACC100 AutoClamp Battery Black Clamp Decker Powered

Generac 5800 XG8000 10,000 Watt 410cc OHV Gas Powered Portable Generator With Wheel Kit

January 21st, 2010

From the Manufacturer

The premium quality power and reliable performance of Generac’s XG Series comes from Generac’s OHVI engine. Depend on this rugged unit to provide years of reliable power to your event or job site. Generac’s OHVI engine is designed specifically for generators. Lasts three to four times longer than competitive engines. Heavy duty, hardened steel tube cradle, full-wrap frame tubing and impact resistant corners for durability. Illuminated Control Panel for improved visibility. Power Bar monitors wattage usage. Low-Oil Pressure Protection to protect engine from damage. Covered Outlets for more protection from the environment. Start/Stop Fuel Shut-Off and Choke Controls conveniently located on control panel. GFCI Circuit Breaker for added protection. External Battery Charge Jack on electric start models. Hour Meter with maintenance resets tracks usage.

Premium quality power is just one advantage of this heavy duty generator enginee
More Generac 5800 XG8000 10,000 Watt 410cc OHV Gas Powered Portable Generator With Wheel Kit from Amazon.com »

No comments »

Posted in Generators

Tags: 10000 410cc 5800 Generac Generator Portable Powered Watt With XG8000

Tanaka TED-270PFHS Commercial Grade 27cc 1.4 HP 2-Stroke Gas Powered High Speed Coring Drill

January 19th, 2010

From the Manufacturer

Tanaka is committed to producing two-stroke powered products. So you might be asking, what does that really mean? For starters, it means that we will not cut your power. You can be sure that all Tanaka products will continue to be lightweight and well-balanced, with outstanding throttle response. In addition, you never have to worry about adjusting the valves, keeping the oil reservoir full, or wondering if the engine will hold up. This translates into less downtime and more productivity and profitability. In 1998, Tanaka was the first two-stroke manufacturer to certify to the stringent C. A. R. B. Tier II emissions standards for California with the innovative, yet simple PureFire engine. Being ahead of the game has allowed Tanaka to gain a considerable amount of low emission technology experience. All Tanaka products comply with EPA phase 2 regulations and all Tanaka product groups are C. A. R. B Tier II compliant. All Tanaka products feature professi
More Tanaka TED-270PFHS Commercial Grade 27cc 1.4 HP 2-Stroke Gas Powered High Speed Coring Drill from Amazon.com »

No comments »

Posted in Power Drills

Tags: 27cc 2Stroke Commercial coring Grade High Powered Speed Tanaka TED270PFHS

Generac QT04824ANAN QuietSourceSeries 48,000 Watt Liquid-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator with Aluminum Enclosure

January 14th, 2010

Enjoy fast-acting automatic protection from power outages with the Generac QT04842ANAN QuietSource Series 48,000 / 46,000 Watt Liquid-Cooled Propane/Natural Gas Powered Automatic Standby Generator with Aluminum Enclosure. Ideal for larger homes and commercial applications, this long-lasting generator features Quiet-Test technology and an automotive style engine that operates at lower speeds, making it one of the quietest models on the market. . caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul. indent {list-style: inside disc;text-indent: 20px;}img. withlink {border:1px black solid;}a. nodecoration {text-decoration: none}Generac’s proprietary RhinoCoat delivers a durable finish that stands up to harsh environments. View larger. This QuietSource generator’s powerful, automotive style engine is engineered to put out more power with less noise. View larger. Standby generators power up automatically within second
More Generac QT04824ANAN QuietSourceSeries 48,000 Watt Liquid-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator with Aluminum Enclosure from Amazon.com »

No comments »

Posted in Generators

Tags: 48000 Automatic Generac Home LiquidCooled Powered Propane/Natural QT04824ANAN QuietSourceSeries Watt

Posts Tagged ‘Powered’